How to Enhance Durability and Performance of Your Motorcycle’s Battery
The high-quality motorcycle battery boosts the functionality of your bike because it powers the engine. There are brands and models of batteries for bikes in the market, but you have to choose the appropriate one. Replace the battery of your motorcycle after three to five years. The battery wears out quickly when you recharge it regularly because of using the motorcycle to travel over long distances often. Maintain the battery of your motorcycle correctly by using the following guidelines to extend its lifespan and functionality.
Clean the battery terminals and grease them as often as you can. Dirt, muck and dust often build up in the battery terminals. The terminals of the battery will eventually corrode because of the accumulated debris in them. The batter will damage and need replacement after a short time if the terminals are not cleaned and greased enough.
Allow the battery to cool when you’re not using the motorcycle. The ventilation of the battery should be enough to boost the flow of air around it. Keep the ventilation holes and piping clear an open always. The running motorcycle makes the hydrogen gas to be released because the source of the debtor to the electrolyte hence the hydrogen gas has to leave the battery through the vents. Failure of hydrogen gas to leave the battery because of blocked pipes and vents is dangerous since hydrogen gas will accumulate in the battery. Hydrogen gas is highly combustible and explosive when it builds up to the right amount hence the batteries will be highly likely to explode.
Ensure the rubber strap that holds the battery in place is where it is supposed to be because it prevents the battery from moving around in the mounting bracket when you corner the motorcycle. You run the risk of your battery cracking or the mixture of water and acid spilling if the battery is not firmly held in place. You will have to repair the damaged paint and parts of your bike and also get treatment from accidental burns of spills of the mixture of water and acid.
There should be an adequate amount of electrolyte in the battery always. The electrolyte should be topped up with distilled water only regularly. Tap water has impurities like metals and minerals that will corrode the cells of the battery or react with the electrolyte. Acid is not recommended for use in batteries. The battery will last longer when you charge it fully before using it anytime it discharges.